Methyl Acetate
Methyl acetate (also known as methyl ethanoate, acetic acid methyl ester, MeOAc, Tereton, Devoton) is a carboxylate ester with a molecular formula of C3H6O2.
Methyl Acetate, anhydrous, 99.5%
Description
Methyl Acetate
Methyl acetate is a clear, colourless liquid that has a typical ester odour similar to glues and nail polish removers. It is very flammable with a flashpoint of -10° C and a flammability rating of 3. Methyl acetate is commonly used in low toxicity solvents such as glues, nail polish removers.
It is highly miscible with all common organic solvents (alcohols, ketones, glycols, esters) but has only slight miscibility in water, but becomes more soluble in water with elevated temperatures. It is commonly found in fruits such as apples, grapes and bananas.
Specification of Methyl Acetate (Grade A 95%):
| No. | CHARACTERISTICS | TEST METHOD | VALUE UNITS |
| 1 | Appearance | Visual Inspection | Clear and Free |
| 2 | Purity, %wt | ASTM D-3545 | 95 (min) |
| 3 | Water | ASTM E-1064 | 0.5 % |
| 4 | Acetic Acid | ASTM D-1613 | 0.003 % |
| 5 | Density gr/cm3, at20°C | ASTM D-1298 | 0.931 |
| 6 | Methanol | ASTM D-3545 | 4.5 %wt |
Specification of Methyl Acetate (Grade B 85%):
| No. | CHARACTERISTICS | TEST METHOD | VALUE UNITS |
| 1 | Appearance | Visual Inspection | Clear and Free |
| 2 | Purity, %wt | ASTM D-3545 | 85 (min) |
| 3 | Water | ASTM E-1064 | 0.5 % |
| 4 | Acetic Acid | ASTM D-1613 | 0.003 % |
| 5 | Density gr/cm3, at20°C | ASTM D-1298 | 0.905 |
| 6 | Methanol | ASTM D-3545 | 14.5 %wt |
General Description
Applications
Industry Uses
Industry uses of methyl acetate involve the reaction of carbonylation of it to produce acetic anhydride. It is commonly used in low toxicity solvents such as paint and coating adhesives, lubricants, intermediates, processing aids and as a solvent in paint, glue, nail polish and graffiti removers.
Methyl acetate is also used as a chemical intermediate for the synthesis of chlorophacinone, diphacinone, fenfluramine, o-methoxyphenyl acetone, p-methoxyphenyl acetone, methyl cinnamate, methyl cyanoacetate, methyldopa, and phenylacetone and in the manufacturing of cellulose adhesives and perfumes.
Commercial Uses
Methyl acetate is used commercially as a flavoring agent in food additives for rum, brandy, whisky, in adhesives, cleaning products, personal care and cosmetic products, lubricants, fast-paced drying paints such as lacquers, motor vehicle coatings, furniture coatings, industrial coatings (low boiling point) inks, resins, oils artificial leathers and electronic products. The main user end markets for this product are the paint, coatings, cosmetic, textiles and motor industries.
It may also be used as a precursor in the synthesis of the following:
- acetic anhydride
- methyl acrylate
- vinyl acetate
- ethyl amide
- Aerosol coatings
- Architectural coatings
- Auto oem
- Auto refinish
- Building materials
- Commerical printing inks
- Construction chemicals
- Fabric care
- Flexographic printing inks
- Furniture
- General industrial coatings
- Graphic arts
- Hard surface care
- Industrial cleaners
- Industrial maintenance
- Institutional cleaners
- Marine
- Other-transportation
- Paints & coatings
- Process additives
- Process solvents
- Roofing ingredients
- Upholstery
- Wood coatings
- adhesives and sealants
- nail polish and remover
- cleansers and exfoliants
- spray paints and coatings
- paint strippers or removers
Methyl acetate is also known as acetic acid methyl ester.
Methyl Acetate is also used for:
- Colors and coatings:
Soluble methyl acetate is a high evaporation rate, so it can be used in the production of all types of early drying paints and wood coatings (varnishes), industrial applications, automobile industry, vehicles and marine equipment, cans and more. The lack of volatile organic matter in methyl acetate has increased its use in the production of colors and coatings. It is also very suitable as a solvent in nail polish. - Clean the surfaces:
used as a solvent in surface cleansers due to its water-repellent and rapid drying properties. Because methyl acetate is rapidly converted to steam. Pollutants do not absorb air to the desired level. In addition, the methyl acetate water-repellent properties make it suitable for cleaning metal surfaces before painting and preparing them for marine applications and moisture-sensitive equipment. - Other Use:
also used as a solvent in the production of quick drying adhesives. The adhesives are produced by dissolving rubber and resin in methyl acetate. When the adhesive is applied on the surface, methyl acetate evaporates rapidly and causes the adhesive to harden and adheres to the surface. Methyl acetate is also used in cosmetics, personal care products such as perfume, nail polish and lacquer cleaner.
Handling
Hazards & Toxicity has an NFPA health rating of 2 and can cause temporary incapacitation or residual injury. If inhaled or ingested, headaches, dizziness, drowsiness, and fatigue can occur.
Contact with the eyes can cause irritation. It has a flammability rating of 3 and can be ignited under most ambient temperature conditions residing from its low flash point of -10 °C. When ablaze, methyl acetate emits heavy, irritating, and toxic fumes that can travel considerable distances. These vapors are also explosive and risk bursting if able to return to the source of ignition.
Methyl acetate’s reactivity is aligned with other compounds of the ester group. In the presence of strong bases or acids such as sodium hydroxide or hydrochloric acid and sulfuric acid at high temperatures, it is converted back into methanol and acetic acid.
Storage & Distribution
Methyl acetate should be stored in a storage area specialized for flammable liquids, tightly enclosed in drummed containers such as iso tanks made of stainless steel, aluminum, or carbon steel. This area should be cool, dry, and well-ventilated, out of direct sunlight, heat, open flames, and away from strong acids and alkalis, nitrates, and strong oxidizers.
A bulk solvent exporter would normally distribute in bulk vessels or tank trucks. For transportation purposes, methyl acetate is classed as a flammable liquid with a fire hazard rating of 2 and is a packing group 2.
Safety & Procedures
Personal protective equipment should be worn at all times when handling methyl ethanoate to prevent contact with the skin, eyes, nose and throat.
If contact is made with the skin, immediately wash the contaminated area and seek medical attention. If contact is made with the eyes, immediately wash with large amounts of water.
If swallowed, seek medical attention immediately.
When opening containers or moving opened containers, they must be fully resealed and maintained in an upright position to prohibit leakages.
If methyl ethanoate is spilt, isolate the leak for at least 50 meters in all directions. In the event of a fire, water extinguishers may be ineffective due to methyl acetate’s low flashpoint. Foam extinguishers that are alcohol-resistant are suitable for small and large fires.
Methyl ethanoate technical properties
Chemical and physical properties of methyl acetate:
Molecular Formula: C3H6O2 / CH3COOCH3
Synonyms: methyl ethanoate, acetic acid methyl ester, MeOAc, tereton, devoton, methyl ester of acetic acid, methylacetate
Cas Number: 79-20-9
Molecular Mass: 74.079 g·mol−1
Exact Mass: 74.036779 g/mol
Flashpoint: 14 °F / -10 °C
Boiling Point: 134.4 °F at 760 mm Hg / 56.8 °C
Melting Point: -144 °F / -98.0 °C
Vapour Pressure: 170 mm Hg at 68 ° F ; 235 mm Hg at 77° F
Water Solubility: ~25% (20 °C)
Density: 0.932 g cm−3
Log P: 0.18
Methyl acetate is a carboxylate ester as it contains a carbonyl group bonded to an OR group and is produced through the esterification of acetic acid with methanol.
How is methyl acetate produced?
There are various methods of producing methyl acetate. One that is used industrially is via carbonylation. These types of reactions bring together carbon monoxide substrates. To produce methyl acetate, methanol is heated alongside acetic acid in the presence of sulfuric acid. Another method of production is the esterification of methanol and acetic acid in the presence of a strong acid. Sulfuric acid is a common catalyst also used in this reaction.
Handling, Storage & Distribution
Hazards & Toxicity
Methly acetate has a NFPA health rating of 2 and can cause temporary incapacitation or residual injury. If inhaled or ingested, headaches, dizziness, drowsiness and fatigue can occur. Contact with the eyes can cause irritation. It has a flammability rating of 3 and can be ignited under most ambient temperature conditions residing from its low flash point of -10 °C. When ablaze, methyl acetate emits heavy, irritating, and toxic fumes that can travel considerable distances. These vapours are also explosive and risk bursting if able to return to the source of ignition.
Methyl acetate’s reactivity is aligned with other compounds of the ester group. In the presence of strong bases or acids such as sodium hydroxide or hydrochloric acid and sulfuric acid at high temperatures, it is converted back into methanol and acetic acid.
Storage & Distribution
Methyl acetate should be stored in a storage area specialised for flammable liquids, tightly enclosed in drummed containers such as isotanks made of stainless steel, aluminium or carbon steel. This area should be cool, dry and well-ventilated, out of direct sunlight, heat, open flames and away from strong acids and alkalis, nitrates and strong oxidisers.
A bulk solvent exporter would normally distribute in bulk vessels or tank trucks. For transportation purposes, methyl acetate is classed as a flammable liquid with a fire hazard rating of 2 and is a packing group 2.
Safety & Procedures
Personal protective equipment should be worn at all times when handling methyl ethanoate to prevent contact with the skin, eyes, nose and throat. If contact is made with the skin, immediately wash the contaminated area and seek medical attention. If contact is made with the eyes, immediately wash with large amounts of water. If swallowed, seek medical attention immediately.
When opening containers or moving opened containers, they must be fully resealed and maintained in an upright position to prohibit leakages.
If methyl ethanoate is spilt, isolate the leak for at least 50 metres in all directions. In the event of a fire, water extinguishers may be ineffective due to methyl acetate’s low flashpoint. Foam extinguishers that are alcohol-resistant are suitable for small and large fires.
What is methyl ethanoate used for?
Industry Uses
Industry uses of methyl ethanoate involve the reaction of carbonylation to produce acetic anhydride. It is also used in paint and coating adhesives, lubricants, intermediates, processing aids and as a solvent in paint, glue, nail polish and graffiti removers.
Methyl ethanoate is also used as a chemical intermediate for the synthesis of chlorophacinone, diphacinone, fenfluramine, o-methoxyphenylacetone, p-methoxyphenylacetone, methyl cinnamate, methyl cyanoacetate, methyldopa, and phenylacetone and in the manufacturing of cellulose adhesives and perfumes.
Commercial Uses
Methyl ethanoate is used commercially as a flavouring agent in food additives for rum, brandy, whisky, in adhesives, cleaning products, personal care and cosmetic products, lubricants, fast-paced drying paints such as lacquers, motor vehicle coatings, furniture coatings, industrial coatings (low boiling point) inks, resins, oils artificial leathers and electronic products. The main user end markets for this product are the paint, coatings, cosmetic, textiles and motor industries.
Application of methyl acetate, CH3COOCH3, China methyl acetate, manufacturer of MeOAc, manufacturer of Methyl Acetate, MeOAc, methyl acetate, methyl ethanoate, specification of MeOAc, specification of methyl ester, supplier of Methyl Acetate, Uses of methyl acetate
Related products
-
n-Propanol
Select options This product has multiple variants. The options may be chosen on the product page
