Chemicals – SINOPETROCHEM https://sinopetrochem.com Solvents, Chemicals & More. Tue, 24 Jan 2023 19:12:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://i0.wp.com/sinopetrochem.com/wp-content/uploads/2022/12/pentanehexaneheptane-2551.jpg?fit=32%2C28&ssl=1 Chemicals – SINOPETROCHEM https://sinopetrochem.com 32 32 213310098 Melamine https://sinopetrochem.com/product/melamine/ Tue, 24 Jan 2023 18:41:15 +0000 https://sinopetrochem.com/?post_type=product&p=1860
  • Synonym(s): 2,4,6-Triamino-1,3,5-triazine, sym-Triaminotriazine
  • Purity: 99% min
  • Empirical Formula (Hill Notation): C3H6N6
  • CAS Number: 108-78-1
  • EC Number: 203-615-4
  • Molecular Weight: 126.12
  • HS Code : 2933610000
  • Payment Terms : T/T, L/C
  • Packaging Details: 25/500/1000kg Plastic Woven Bags
    • ]]>

    Melamine forms synthetic resins with formaldehyde. It remains largely non-metabolized in male Wistar rats with 90% of the administered dose excreted in the urine and thus acts as a non-protein nitrogen food additive found in milk. Drinking water contaminant candidate list 3 (CCL 3) compound as per United States Environmental Protection Agency (EPA), environmental, and food contaminants. Melamine is an organic-based, nitrogen-rich compound used to manufacture cooking utensils, plates, plastic products, and more. Melamine resin is durable, fire and heat resistant and virtually unbreakable, making melamine products more desirable than other plastic housewares.
    Catalogue Number JY2301250112
    Chemical Name Melamine
    Synonyms 1,3,5-Triazine-2,4,6-triamine; 2,4,6-Triamino-s-triazine; Cyanurotriamide; NSC 2130;
    CAS Number 108-78-1
    Molecular Formula C₃H₆N₆
    Appearance White Solid
    Melting Point >300˚C (sublimes)
    Molecular Weight 126.12
    Storage 4°C
    Solubility DMSO (Slightly, Heated)
    Category Building Blocks; Miscellaneous;

    Melamine is a nitrogen-containing heterocyclic amine that is used as a flame retardant, plasticizer, and textile dye. The toxicity of melamine has been evaluated in animal studies, which showed that it has low acute oral toxicity but high inhalation and dermal toxicity profiles. The acute effects of melamine are due to its capacity to bind to the erythrocyte membrane and cause hemolysis. Melamine can also react with cyanuric acid to form cyanuramide, which can be detected by gas chromatography/mass spectrometry (GC/MS) analysis. The carcinogenic potential of melamine has not been determined, but there is evidence that it may be genotoxic and have the potential to induce cancer in humans.

    Manufacture and applications of melamine
    Melamine can be manufactured from dicyandiamide, hydrogen cyanide, or urea. Modern commercial production of melamine typically employs urea as a starting material. Urea is broken down to cyanuric acid, which then can be reacted to form melamine. Its most important reaction is that with formaldehyde, forming melamine-formaldehyde resins of high molecular weight. These compounds form under the influence of heat and then become fixed into an insoluble and infusible mold; this process is known as thermosetting. Melamine-based thermoset materials contain cross-linked polymers, which make the fixed molds strong and durable. Usually formulated with fillers and pigments, melamine resins can be molded into dishes, containers, utensils, handles, and the like or used as laminating agents or coating materials for wood, paper, and textiles. Formica and Melmac are well-known trade names for products based on melamine resins.

    Melamine has also been incorporated into a variety of flame-retardant materials. This application is based on the compound’s high nitrogen content. When exposed to heat, melamine degrades and releases nitrogen. The freed nitrogen takes the place of oxygen in the surface air surrounding the material, which prevents the material from burning. Butylated melamine resins, made by incorporating butyl alcohol into the melamine–formaldehyde reaction mixture, are fluids used as ingredients of paints and varnishes. A copolymer containing melamine, formaldehyde, and sodium bisulfite produces a foam with sound-absorbing and flame-retardant properties. The foam has a notably hard microbubble structure, which gives it an abrasive quality that has been utilized in the development of cleaning products.

    Product Details

    Purity: 99.8%
    Classification: Organic Chemicals
    Application: Industrial
    Form: Powder
    Molecular Formula: C3H6N6
    CAS No: 108-78-1
    Usage: whiteboards, floor tiles, kitchenware, fire retardant fabrics, and commercial filters.
    Packaging Details: 25/500/1000kg Plastic Woven Bags
    Payment Terms: Cash in Advance (CID), Telegraphic Transfer (T/T), LC
    Supply Ability: 33,600 tons Per Year
    Delivery Time: 1-2 Weeks
    Main Export Market(s): Africa, Eastern Europe, Central America, Asia, Western Europe, Australia, South America, North America, Middle East
    Main Domestic Market: All China
    Sample Available: Yes
    Sample Policy: Free samples available with shipping and taxes paid by the buyer
    FOB Port: Qingdao
    Offered By: Junyuan Petroleum Group
    Product Description
    Product Name: Melamine, 99.8%
    HS CODE: 29336100
    Condition: New
    Color: White
    Fire Resistant with High Temperaturses
    Type: Industrial Chemical

    Melamine (CAS No.: 108-78-1)

    Junyuan Petroleum Group is an ISO 9001:2015 Certified Global Manufacturer and Supplier based in China for the product CAS No.: 108-78-1.
    We offer the product CAS No.: 108-78-1 from our manufacturers / suppliers / principals for your Research and Development / Evaluation or Commercial requirements, based on the product’s availability from our network. We can also offer other required upstream or downstream intermediates with the supportive technical package for evaluation based on the customer’s request.
    We respect our customer’s requirements of strict regulatory compliance and specification needs by offering the intermediates transparently while offering easy access to manufacturer / supplier / principals with affordable and high-quality raw material intermediates.
    If you are looking for any upstream or downstream intermediates concerning CAS No.: 108-78-1, please feel free to email us. Based on your specific request, we will source the right manufacturer / supplier / principals who is reliable and meets your required quality standard requirements.

    BUSINESS TYPE: Exporter, Manufacturer
    Chemical Name:1,3,5-Triazine-2,4,6-triamine; 2,4,6-Triamino-1,3,5-triazine; 2,4,6-Triamino-s-triazine, Melamine (CAS No.: 108-78-1)
    Manufacturer Certificate: ISO Certified

    Synonym: 1,3,5-Triazine-2,4,6(1H,3H,5H)-triimine;2,4,6-triamino-s-triazin;2,4,6-Triaminotriazine;Aero;Cyanuric triamide;cyanurictriamide;Cyanurotriamine;Cyanurtriamide, Melamine (CAS No.: 108-78-1)
    Molecular Formula: C3H6N6
    Molecular Weight: 126.12
    Manufacturer Specifications: Available on request
    Packing: Export worthy packing
    Material Safety Data Sheet: Available on request

    Melamine, 99%

    MDL: MFCD00006055
    EINECS: 203-615-4

    Chemical Properties

    Formula: C3H6N6
    Formula Weight: 126.12
    Melting point: ca 350° dec.
    Density: 1.573
    Storage & Sensitivity: Ambient temperatures.
    Solubility: Slightly soluble in water, hot alcohol, glycerol, glycol and pyridine. Insoluble in ether, benzene and carbon tetrachloride.

    Applications

    Melamine is used in the production of synthetic resins such as melamine resin with formaldehyde, which is used in high pressure decorative laminates like formica, melamine dinnerware, laminate flooring, and dry erase boards. The presence rich in nitrogen content resulted in fire retardant properties when mixed with resins. It is used to prepare melamine cyanurate by reacting with cyanuric acid. It finds application as superplasticizer for making high-resistance concrete, soundproofing material and in polymeric cleaning products like magic eraser. It is an active component in pigment yellow 150. Further, it is also used as a nitrogen and carbon source for N-doped carbon nanotube.

    Notes

    Store in a cool place. Incompatible with strong oxidizing agents and strong acids.

    GHS Hazard and Precautionary Statements

    Hazard Statements: H303-H361

    May be harmful if swallowed. Suspected of damaging fertility or the unborn child.

    Precautionary Statements: P201-P202-P270-P280-P301+P312-P308+P313-P403+P233-P501c

    Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. IF exposed or concerned: Get medical advice/attention. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/ container to an approved waste disposal plant

    Other References

    Merck: 14,5811
    Beilstein: 124341
    Harmonized Tariff Code: 2933.61
    TSCA: Yes
    RTECS: OS0700000
    Melamine
    CAS Number: 108-78-1
    Synonyms: 2,4,6-Triamino-1,3,5-triazine ; 1,3,5-Triazine-2,4,6(1H,3H,5H)-triimine ; 2,4,6-Triamino-s-triazine ; 2,4,6-Triaminotriazine ; Cyanurotriamide ; Theoharn ; Triamino-s-triazine ; NSC 2130 ; Melamine ; Metformin Impurity D
    Molecular Formula: C3 H6 N6
    Molecular Weight: 126.12
    Category No:JY633
    Inventory: In Stock

    Other names: Melamine, 2,4,6-Triamino-s-triazine, Cyanurotriamide, Cyanurotriamine, Cyanuramide

    Melamine is the organic compound with the formula C3H6N6. This white solid is a trimer of cyanamide, with a 1,3,5-triazine skeleton. It is widely used in production of certain plastics, e.g. Formica. Like cyanamide, it contains 67% nitrogen by mass, and its derivatives have fire retardant properties due to its release of nitrogen gas when burned or charred.

    DESCRIPTION
    In one large scale application, melamine is combined with formaldehyde and other agents to produce melamine resins. Such resins are characteristically durable thermosetting plastic used in high pressure decorative laminates such as Formica, melamine dinnerware, laminate flooring, and dry erase boards.

    Melamine foam is used as insulation, soundproofing material and in polymeric cleaning products, such as Magic Eraser.

    Melamine is one of the major components in Pigment Yellow 150, a colorant in inks and plastics.

    Melamine also enters the fabrication of melamine poly-sulfonate used as superplasticizer for making high-resistance concrete. Sulfonated melamine formaldehyde (SMF) is a polymer used as cement admixture to reduce the water content in concrete while increasing the fluidity and the workability of the mix during its handling and pouring. It results in concrete with a lower porosity and a higher mechanical strength, exhibiting an improved resistance to aggressive environments and a longer lifetime.

    Shelf Life on Ship Date: 24 Months – Store in a refrigerator at temperatures between 2°C to 8°C

    Lot Purity
    Lot Number Purity
    JY2209820 99.50
    JY22986530 99.50
    Lot Expiration
    Lot Number Expiration
    JY0986532 02/30/28
    JY2098653 03/30/28
    Alternate Name(s) Melamine, 1,3,5-TRIAZINE-2,4,6-TRIAMINE
    Stock Status In Stock
    Size 1G
    Molecular Formula C3-H6-N6
    Molecular Weight 126.13
    Sample Available

    Properties

    Quantity: Milligrams-Grams-Kilos
    Boiling Point: 299.696 ℃ at 760 mmHg
    Melting Point: >300 ℃ (sublimes)
    Density: 1.573 g/cm3
    InChI Key: JDSHMPZPIAZGSV-UHFFFAOYSA-N
    InChI: InChI=1S/C3H6N6/c4-1-7-2(5)9-3(6)8-1/h(H6,4,5,6,7,8,9)
    Canonical SMILES: C1(=NC(=NC(=N1)N)N)N
    Refractive Index: 1.922
    Stability: Stable. Incompatible with strong acids, strong oxidizing agents. Nonflammable.
    Physical
    • Form: solid
    • Melting point: >300°C
    • Flash point: 300°C
    • Density: 1,48 g/cm3
    • Mol Weight: 126.12 g/mol
    • Storage temp: RT
    Specs
    • Assay >99%
    Safety
    • HS Nr: 29336100

    Refer to SDS for detailed product information.

    Signal word: Warning
    Hazard statements
    Harmful if swallowed. (Acute toxicity, oral, category 4)\nHarmful if absorbed through skin. (Acute toxicity, dermal, category 4)\nMay be irritating to mucous membrane and upper respiratory system. (Specific target organ toxicity, single exposure; Respiratory tract irritation, category 3)\nThis product is or contains a component that is classified (ACGIH, IARC, NTP, OSHA) as a suspect cancer hazard. (Carcinogenicity, category 2)
    Precautionary statements
    Eye contact: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. (P338)\nSkin contact: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if symptoms occur. Wash clothing before reuse. (P360)\nIngestion: Wash out mouth with water. Never give anything by mouth to an unconscious person. Call a physician or poison control center if adverse effects develop. (P330)\nStore in a tightly closed container. (P404)\nDo not get in eyes, on skin or clothing. (P262)\nThis product should only by used by persons trained in the safe handling of hazardous chemicals. (P202)\nWash thoroughly after handling. Do not take internally. Eye wash and safety equipment should be readily available. (P264)\nRespiratory Protection: If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), or a risk assessment shows air-purifying respirators are appropriate, use of a NIOSH/MSHA approved air supplied respirator is advised. Use a full-face respirator with multi-purpose combination (US) or type ABEK (EN14387) respirator cartridges in absence of proper environmental control. Always use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Engineering and/or administrative controls should be implemented to reduce exposure.
    Physical State : Solid
    Solubility : Soluble in DMSO
    Storage : Store at 4° C
    Melting Point : >300° C (lit.)

    ]]>     1860     Maleic Anhydride https://sinopetrochem.com/product/maleic-anhydride/ Tue, 26 Jan 2021 16:57:08 +0000 https://www.cssigniter.com/demos/nozama/?post_type=product&p=163
  • Assay (morpholine method): ≥ 99,0 %(m)
  • CAS Number: 108-31-6
  • Molecular Weight: 98.06
  • Melting range (lower value): ≥ 51 °C, Melting range (upper value): ≤ 54 °C
  • Synonyms: 2,5-Furandione; Dihydro-2,5-dioxofuran; cis-Butenedioic Anhydride; NSC 137651; NSC 137652; NSC 137653; NSC 9568; Nourymix MA 901; Toxilic anhydride;
    • ]]>

    Maleic anhydride is produced by oxidation of benzene or a C4 hydrocarbon such as butane in the presence of a vanadium oxide catalyst. Maleic anhydride can be converted to maleic acid by hydrolysis and to esters by alcoholysis.

    Applications

    Maleic Anhydride is heterocyclic compound used in the manufacture of unsaturated polyester resins. Maleic Anhydride has a wide range of other applications; it is used in synthetic tensides, insecticides, herbicides and fungicides. Maleic anhydride has a very broad range of uses from food additives to industrial applications.

    • Synthetic resin raw material (unsaturated polyesters)
    • Paints and coatings
    • Resin modifiers
    • Vinyl chloride stabilizers
    • Food additives (fumaric acid, succinic acid, malic acid)
    • Agricultural chemicals
    • Paper sizing agents
    • Imides
    • Surfactants
    • Plasticizers (DOM, DBM, DEM)
    • Other (GBL, 14BG, THF)

    Storage and Handling

    The Japan Fire Service Law does not apply to maleic anhydride.  When handling, avoid contact with eyes and skin by using proper protective equipment such as goggles and gloves.  If skin contact occurs, wash immediately with soap and water.

    Specifications

    Product Specifications
    Item Specification
    Appearance White crystals
    Water-soluble form Clear colorless
    Melting Point (℃) >52
    Purity (%) >99.5
    Dissolution Test (Hazen) <20
    Iron (%) <0.0005

    Available Packaging Options
    Liquid Product ISO Tank Container 200L Steel Drum

    Junyuan Petroleum Group manufactures and distributes fine chemicals with quality you can count on including those with CAS number 108-31-6, Whether you call it Maleic Anhydride or 2 -5-Furandione you can be assured the products offered by Junyuan Petroleum Group, meet or exceed the grade requirements or specifications for each individual product.

    Molecular Formula : C4H2O3
    Molecular Weight : 98.06
    Storage : Room Temperature
    Shelf Life : 60 Months
    HSN Code : 29171990
    IMDG Identification :UN No.:2215 , IMCO Class No.:8 , Packing Group:III
    Appearance (Colour): White
    Appearance (Form): Lumps
    Solubility (Turbidity) 10% aq. solution: Clear
    Solubility (Colour) 10% aq. solution: Colouless
    Assay (NT): min. 99%
    Melting Point: 52 – 54°C
    Chloride (CI) max.: 0.001%
    Sulphate (SO4) max.: 0.01%
    Iron (Fe) max.: 0.001%
    Heavy Metals (Pb) max.: 0.001%

    The acid anhydride of Maleic Acid synthesized from the oxidation of benzene or butane, is used to produce 1,4-butandiol (BDO) and unsaturated polyester resins (UPR). Maleic Anhydride (MA) is used to make UPR which is used for the production of plastics. Maleic anhydride is a useful chemical intermediate in in organic synthesis. It is often used to make downstream derivatives for plastics, adhesives and coatings. Its hydrolyzed form is maleic acid. Maleic anhydride is also a dispersant; it compounds with sulfurous additives and acts as a dispersant in drilling mud. Click here for more drilling fluid additives! Use: FILM FORMING

    Maleic anhydride

    MDL: MFCD00005518
    EINECS: 203-571-6

    Chemical Properties

    Formula: C4H2O3
    Formula Weight: 98.06
    Melting point: 52-56°
    Boiling Point: 202°
    Flash Point: 103°(217°F)
    Storage & Sensitivity: Moisture Sensitive. Ambient temperatures.
    Solubility: Soluble in water, acetone and dioxane. Slightly soluble in methanol, chloroform and benzene.

    Applications

    Maleic anhydride is used in the preparation of unsaturated polyester resins, 4-butanediol, fumairc acid, tetrahydrofuran and gamma-butyrolactone. It is also used as lubricating oil additives, dispersants, artificial sweeteners, flavor enhancements, floor polishes and corrosion inhibitors. It finds application in personal care products like hair sprays. Further, it is used in water treatment chemicals, detergents, pharmaceuticals and copolymers. It is an active substrate for Diels-Alder reactions and dimerizes to form cyclobutane tetracarboxylic dianhydride .

    Notes

    Moisture sensitive. Incompatible with strong oxidizing agents, strong acids, strong bases, strong reducing agents, alkali metals and amines.

    GHS Hazard and Precautionary Statements

    Hazard Statements: H302-H314-H317-H334-H372

    Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Causes damage to organs through prolonged or repeated exposure.

    Precautionary Statements: P264b-P270-P271-P272-P280-P303+P361+P353-P304+P340-P305+P351+P338-P310-P330-P331-P362+P364-P403+P233-P501c

    Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting. Take off contaminated clothing and wash before reuse. And wash it before reuse. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/ container to an approved waste disposal plant

    Other References

    Merck: 14,5704
    Beilstein: 106909
    Hazard Class: 8
    Packing Group: III
    Harmonized Tariff Code: 2917.14
    TSCA: Yes
    RTECS: ON3675000

    MALEIC ANHYDRIDE

    Maleic Anhydride is an organic compound that is a colorless or white solid with an acrid odor. Uses: In the manufacture of unsaturated polyester resins and as lubricating oil additives. CAS# (108-31-6).

    Substance name:maleic anhydride
    Trade name:Maleic anhydride
    EC no:203-571-6
    CAS no:108-31-6
    HS code:29173500
    Formula:C4H2O3
    Synonyms:2,5-furandione / BM 10 / butenedioic acid anhydride,cis- / butenedioic anhydride,cis- / cisbutenedioic acid anhydride / cis-butenedioic anhydride / cis-ethendicarboxylic anhydride / dihydro-2,5-dioxofuran / MA / MAA(=maleic anhydride) / MAH / MALA / maleic acid anhydride / Maleic anhydride / maleic anhydride,briquettes / maleic anhydride,flakes / maleic anhydride,solid / MSA(=maleic acid anhydride) / nourymix MA 901 / toxilic anhydride

     

     

    ]]>     163     Aluminum chloride https://sinopetrochem.com/product/aluminum-chloride/ Tue, 26 Jan 2021 16:53:29 +0000 https://www.cssigniter.com/demos/nozama/?post_type=product&p=151
  • Assay: 95.00 to 99.99
  • Synonym(s): Aluminum trichloride
  • Linear Formula: AlCl3
  • CAS Number: 7446-70-0
  • Molecular Weight: 133.34
  • EC Number: 231-208-1
    • ]]>

    Aluminum chloride, anhydrous, Reagent Grade

    The apparently straightforward inorganic compound aluminium chloride – AlCl3 – has a number of structural surprises up its sleeve, yet it is best known as the doyen of Lewis acids, making it a highly effective catalyst in organic reactions.

    Product Specification

    Product Number: 12298
    CAS number: 7446-70-0
    MDL number: MFCD00003422
    Molecular formula: AlCl3
    Molecular weight: 133.34
    Product Specification
    Appearance (Color): White
    Form: Powder
    Assay (unspecified): ≥99.0%
    Comment: Copper: Report
    Comment: Free Aluminum: Report
    Comment: Iron: ≤50 ppm
    Comment: Magnesium: Report
    Comment: Zinc: Report
    Insoluble material: ≤0.05%
    Non-Volatile Residue: ≤0.4%

    PROPERTIES

    vapor pressure:1 mmHg ( 100 °C)
    assay: 99.99% trace metals basis
    form: powder
    reaction suitability: reagent type: catalyst, core: aluminum
    impurities: ≤150.0 ppm Trace Metal Analysis
    mp: 190 °C (lit.)
    SMILES string: Cl[Al](Cl)Cl
    InChI: 1S/Al.3ClH/h;3*1H/q+3;;;/p-3
    InChI key: VSCWAEJMTAWNJL-UHFFFAOYSA-K

    MDL: MFCD00003422
    EINECS: 231-208-1

    Chemical Properties

    Formula: AlCl3
    Formula Weight: 133.34
    Form: Lump/Powder
    Melting point: 190° subl.
    Density: 2.44
    Storage & Sensitivity: Moisture Sensitive. Ambient temperatures.
    Solubility: Highly soluble in water. Soluble in alcohol, ether, glycerol, propylene glycol and acetonitrile.

    Applications

    It is used as a catalyst for Friedel-Crafts acylation and alkylation of aromatic compounds. It is one of the most commonly employed Lewis acids for a wide variety of organic transformations. It catalyzes the ene reaction, polymerization, and isomerization reactions. For example, it can be used to synthesis ethyl benzene which is a precursor for producing polystyrene. It can be used for producing dodecylbenzene, a key intermediate for detergents. It is useful in the production of anthroquinone, the presursor for dyestuffs. It is used in the synthesis of bis(arene) metal complexes, through Fischer-Hafner synthesis. Gattermann-Koch reaction employs aluminum chloride for introducing formyl group onto aromatic rings.

    Notes

    Aluminum chloride is hygroscopic. It must be packed in a tightly closed container and stored in a cool, dry, and well-ventilated area. It is water-reactive and corrosive in nature. It reacts vigorously with bases.

    GHS Hazard and Precautionary Statements

    Hazard Statements: H314-H335

    Causes severe skin burns and eye damage. May cause respiratory irritation.

    Precautionary Statements: P260-P264b-P271-P280-P301+P330+P331-P303+P361+P353-P304+P340-P305+P351+P338-P310-P363-P501c

    Do not breathe dust/fume/gas/mist/vapours/spray. Wash face, hands and any exposed skin thoroughly after handling Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Wash contaminated clothing before reuse. Dispose of contents/ container to an approved waste disposal plant.

    Use: Aluminium Chloride, (AlCl3) is probably the most commonly used Lewis acid and also one of the most powerful. It finds application in the chemical industry as a catalyst for Friedel Crafts reactions, both acylations and alkylations. Important products are detergents and ethylbenzene. It also finds use in polymerization and isomerization reactions of hydrocarbons.

    Other References

    Merck: 14,337
    Hazard Class: 8
    Packing Group: II
    Harmonized Tariff Code: 2827.32
    TSCA: Yes
    RTECS: BD0525000

    Features and Benefits

    The vapor-phase co-reductions with other metal halides by hydrogen results in finely divided intermetallics with applications as structural materials or compounds with useful thermoelectric, magnetic, and oxidation-resistance properties. Aluminum nitride can be synthesized from the elemnts with AlCl3 added to help facilitate crystallization.

    Synonyms:

    aluminium chloride
    aluminium chloride (AlCl3)
    aluminium chloride, anhydrous
    aluminium trichloride
    aluminium(3+) chloride
    aluminium(III) chloride
    aluminiumchloride
    aluminum chloride (AlCl3)
    aluminum chloride, anhydrous
    aluminum trichloride
    aluminum(3+) chloride
    aluminum(III) chloride
    aluminumchloride
    trichloroalumane
    trichloroaluminium
    trichloroaluminum

     

    ]]>     151